Do you need a part for your vintage 1911 or 1911A1 Frame/receiver? Then this is the category to list or search in.
Find your perfect 1911 frame part here!
Publish new advertisement
- Publish Date: Jun-19-18
- Price: $150.00
I am by no means an expert on these, so I will probably not be able to give you much information beyond what is shown in the photographs. The left grip appears to have 15 lines, the right grip appears to have 13 (but I could just be counting wrong). They…
I am by no means an expert on…
looking for 1914 colt 1911 government grips, 15 lines. Let me know what you have. Thanks
looking for 1914 colt 1911…
Wanted Springfield Frame WW1 USCall 954-803-6014 Also Ithaca frame if available WW 2.
Wanted Springfield Frame WW1…
Looking for a Ithaca 1911a1 frame.
Looking for a Ithaca 1911a1…
WTB Springfield S Marked Parts for a 1914 date 1911
Need: bushing, slide stop , safety lock, barrel with S on right lug only, grip safety. Please email with what you have and asking price. Gun has very good finish so need parts to match. Thanks. Bob…
WTB Springfield S Marked Parts…
Looking for an original 1911a1 checkered slide stop to complete a 1943 Union Switch and signal. Cash waiting!! Email Ryan @. pit_warrior@hotmail.com
Looking for an original 1911a1…
Wanting to buy 1911 frame in good condition, preferably stainless, but will look at any.
Wanting to buy 1911 frame in…
looking for a matching set of grips and mag for a 57 NM
gbourdon28@gmail.com
looking for a matching set of…
- Publish Date: Mar-25-18
- Price: $750.00
Wanted to sell, Colt m1911 slide in excellent condition. The slide is for 1917 m1911. There is a little bit of pitting on the lower edge of the right side of the slide as seen in the pictures.
If you are rebuilding a 1911, you know these these slides…
Wanted to sell, Colt m1911…
Looking to buy an original magazine Colt service model Ace .22 full blue WWII.
For a Colt pistol Parkerised (Parco Lubrite) made in 1945.
Thank you for your help.
Looking to buy an original …
WTB a Type 1 , S marked hammer Nfor a 1914 Manufacture Springfield 1911. Please email if you can help. Also need an S marked barrel bushing and S marked slide stop.
Baner785@gmail.com
Thanks
Bob
WTB a Type 1 , S marked hammer…
WTB Springfield Slide Stop , Type 1 , Second Variation with diamonds to top of thumb tab and 12 diamonds on the lower edge. Usually S marked on back. Please message with details and price. Thank you.
WTB Springfield Slide Stop ,…
WTB an original set of Double Diamond 11 Row grips for a 1914 Springfield 1911. Need a very good to excellent set.
WTB an original set of Double…
- Publish Date: Feb-13-18
- Price: $500.00
For sale is a WW1 Springfield 1911 magazine.
Asking $500 Make me an offer
Jim at 386-427-9098
For sale is a WW1 Springfield…
Paying top dollar. Have many early 1911 grips, barrels and mags to trade only if desired.
Paying top dollar. Have many…
I am looking for a Colt 1911 U.S. Army Type 1 Magazine. If you have one or know where i could find one please let me know.
I am looking for a Colt 1911…
I’m looking for a Remington Rand Frame. I have all the parts for a Remington Rand, except the frame.
I’m looking for a Remington…
- Publish Date: Dec-18-17
- Price: $257.00
For sale is a Colt 1911 WW1 grip with diamonds and truncated diamonds.
Excellent condition
asking $257 including shipping
For sale is a Colt 1911 WW1…
- Publish Date: Dec-09-17
- Price: $90.00
For sale is this 1911a1 WW2 era General Shaver magazine. This magazine is in good condition, as the photos show some bluing has worn off of the bottom. The General Shaver magazine is typically associated with the Remington Rand 1911a1's due to their…
For sale is this 1911a1 WW2…
- Publish Date: Nov-23-17
- Price: $58.00
For sale is this set of late Coltwood 1911a1 grips. These grips are appropriate for Colt 1911a1's from about serial number 795,000 to the end of production. These grips are in good condition with NO chips or cracks. Price is $58 shipped within the…
For sale is this set of late…
- Publish Date: Nov-22-17
- Price: $145.00
For sale is this set of early Coltwood 1911a1 "hollow back" grips. These grips are correct for Colt 1911a1's from about serial number 725,000 to about 795,000. As the photos show these grips have very little to no wear - absolutely NO chips, cracks, or…
For sale is this set of early…
- Publish Date: Nov-07-17
- Price: $1,000.00
Looking for an original keyhole magazine for my collection. I am willing to pay VERY generously for one OR for a lead that results in a purchase. Call Shawn at 802-316-1020.
Looking for an original…
- Publish Date: Aug-30-17
- Price: $107.00
For sale is a WW2 magazine made by General Shaver Co.
Asking $107 includes shipping
Jim at 386-427-9098
For sale is a WW2 magazine…
- Publish Date: Aug-26-17
- Price: $130.00
For sale is this 1911a1 early Remington Rand checkered mainspring housing. This mainspring housing is correct for the type 1 & 2 early variety Remington Rands and can be verified by its fine checkering. This auction is for the housing only, the internal…
For sale is this 1911a1 early…
I am looking for a 1918 magazine release. Please message me with any thoughts. Thanks in advance.
I am looking for a 1918…
- Publish Date: Jun-27-17
- Price: $57.00
For sale is a WW2 magazine made by M.S. Little type 5b destination was US Government.
Good condition with original bluing still remaining.
Asking $57 includes shipping
Jim at 386-427-9098
For sale is a WW2 magazine…
- Publish Date: Jun-03-17
- Price: $110.00
For sale is this 1927 Colt Sistema mainspring housing. Photos show the details as this item is in good condition containing much of its original blued finish. The internal spring and pin can be purchased separately for $11 installed. Price is $110…
For sale is this 1927 Colt…
I need a set of 15 line grips. I don't need bottom trashed out grips nor collector grade. Nice set of middle of the road. No cracks, gouges or worn out checkering. I have a set of 13 line grips to trade if you'd rather do that than sell outright . …
I need a set of 15 line grips.…
- Publish Date: Apr-30-17
- Price: $45.00
For sale is this WW2 era stamped trigger. This trigger is correct for late Colt, Remington Rand, and Ithaca manufactured 1911a1's. As the photos show this part is in good condition. Price is $45 shipped.
For sale is this WW2 era…
WTB a nice set of stocks (grips) for a 1940s/early 50s Colt Government model. These are the plastic brown with the circled mustang.
WTB a nice set of stocks…
- Publish Date: Apr-28-17
- Price: $2,000.00
i am looking to purchase a 1911 us army ww1 frame in good condition, i will pay very good money to aquire one, must be able to ship to my address in the UK. and import,export as antique
i am looking to purchase a…
Wtb an old colt frame 1940-1980 pics and prices plz email to
sro94@hotmail.com
Wtb an old colt frame…
- Publish Date: Apr-22-17
- Price: $67.00
For sale is a WW1 magazine made by M.S. Little manufacturing company
This magazine is a type 4D (riveted base plate fastening)
Asking $67 includes shipping
386-427-9098
For sale is a WW1 magazine…
- Publish Date: Mar-17-17
- Price: $100.00
Call, text or email. Joey 206.335.2190 Jclewis19@comcast.net
Call, text or email. Joey…
Looking for any Springfield 1911 Frame for purchase or trade. I have multiple 1911 "S" marked parts for trade and open to any offer so lets talk if you have a frame. I am also always interested in buying any "S" marked parts so if you have one part or a…
Looking for any Springfield…
Looking for a WWII 1911 Frame, Let me know what you have Thx
Looking for a WWII 1911 Frame,…
Would like to swap a colt 1911 wwi barrel. I have a barrel with "interlaced hp" for serial # 400,000 to end of 1911 production # 629,500. For a barrel with hp separated ( ser # 120,000-400,000).looking for equal condition barrel. My barrel is in excellent…
Would like to swap a colt 1911…
I need to buy an Ithaca complete lower frame with grips. I have all the upper parts. Preferably mil spec.
I need to buy an Ithaca…
WTB:COLT 1911 US PROPERTY FRAME MADE IN 1912. 4 DIGIT SERIAL NUMBER
WTB:COLT 1911 US PROPERTY…
Looking to buy a frame, preferably for a ww1 1911, but interested in a 1911a1 frame as well. Please let me know what you may have and asking price.
Looking to buy a frame,…
Looking for a 1913 Commercial frame or parts gun. Please let me know what you have.
Thanks Bill
Looking for a 1913 Commercial…
- Publish Date: Sep-04-16
- Price: $100.00
I have what has been told to me to be an Union Switch & Signal Du-lite stamped trigger. Looks to be in good condition. I will get pictures of it in a little bit.
$100 shipped. PAYPAL preferred.
EARRNHARDT3@AOL.COM
I have what has been told to…
Wanted to buy (or have lots of nice magazines to trade). Colt Manufactured, all blue, brushed military finish, Pinned base, No letters or markings anywhere. Will pay top price or trade for this magazine.
Wanted to buy (or have lots of…
- Publish Date: Jul-18-16
- Price: $107.00
For sale is a WW1 2 tone type 4a magazine (no lanyard loop)
Asking $107
386-427-9098
For sale is a WW1 2 tone type…
- Publish Date: Jul-12-16
- Price: $44.00
For sale is this set of Korean war era replacement Keyes Fibre 1911a1 grips. As the photos show, these grips contain the "K" inside star along with their mold number and also their part number (left grip - 5560462, right grip - 5564063). These grips…
For sale is this set of Korean…
- Publish Date: Jul-12-16
- Price: $55.00
For sale is this early (not late ribbed variety) Ithaca 1911a1 hammer. As the photos show this hammer is in really good condition. Price is $55 shipped within the CONUS.
For sale is this early (not…
- Publish Date: Jul-05-16
- Price: $1,000.00
any parkerized frame wanted uk buyer will pay extra for shipping and condition must be curi relic no ffl
any parkerized frame wanted uk…
I'm looking for a set of double diamond grips for my recently acquired 1918 Colt 1911. I'm willing to pay a reasonable price and I have a set of fully checkered grips in very good condition that I would be willing to throw in as part of the trade. I will…
I'm looking for a set of…
Looking for slide stop for Union Switch & Signal 1911A1. Pistol is in 1,07x, xxx range with original dulite blue finish. Thank's
Looking for slide stop for…
Need a pair of original walnut grips for 1958 Colt National Match pistol.
Need a pair of original walnut…
Bought a 1911 and has an ithaca slide but an essex frame. Would love to find an ithaca frame.
Email me at
Rodman.ewing@gmail.com
If you have one. Thanks.
Bought a 1911 and has an…
- Publish Date: Jan-28-16
- Price: $120.00
For sale is this early Colt / Ithaca 1911a1 checkered main spring housing. As the photos show, this MSH does have some pitting one of it's sides. This is just the housing only, the internal spring & pins can be purchased separately for $11 installed. …
For sale is this early Colt /…
Need a frame to go with my RR Type III slide.
Need a frame to go with my RR…
Wanted an early 1911 Colt Frame from early 1912 that falls within the first 4500 manufactured.
Wanted an early 1911 Colt…
- Publish Date: Aug-03-15
- Price: $225.00
For sale is a chrome plated WW1 magazine with landyard loop.
Good condition.
Asking $225
For sale is a chrome plated…
NEEDED: UNION SWITCH & SIGNAL FRAME
I am looking to purchase a US&S Frame in very good to excellent condition with its original finish. I am not interested in an arsenal rebuild frame, but would consider an entire gun with a US&S frame and non-matching…
NEEDED: UNION SWITCH & SIGNAL…
- Publish Date: Jul-15-15
- Price: $450.00
Up for sale is a very rare one partial year only production magazine for the 1917 Springfield. If you have a 1917 Springfield you probably need this magazine to make your pistol correct. These are very hard to find in any condition as most sellers know…
Up for sale is a very rare one…
- Publish Date: Jun-17-15
- Price: $75.00
For sale is a set of original pre WW2 checkered wooded grips - very worn.
$75
Jim at 386-427-9098
For sale is a set of original …
- Publish Date: May-11-15
- Price: $15.00
For sale is this set of internal parts for the 1911 / 1911a1 MSH. What you see is what you get. Price is $15.00 shipped.
For sale is this set of…
Two tone lanyard loop magazine, for 1914 Canadian contract pistols, this is one of the 1915 additional magazines with a broad arrow in "C" stamped on the toe, $350 shipped (no pay pal) 4speed318@gmail.com
Two tone lanyard loop…
I am in need of a serrated slide stop with good original finish. I can offer a checkered version in a trade or pay cash.
I am in need of a serrated…
Need the following good condition+ parts for Colt Model 1911 SN 227XXX:
Type 1 TriggerType 2 Thumb safety w/shelfType 1, Variation 1 Slide StopType 1 Variation, 1 Mainspring HousingType 1, Variation 1 TriggerLet me know price and condition. Ready to buy.…
Need the following good…
Need a handy reference sheet for all those magazines you have in that box? Or a handy sheet to take with you the a gun show? Here it is for free. Go to the HOME page of this site. Waaay down at the bottom you will see MAGAZINE PAGE. Click on that and…
Need a handy reference sheet…
- Publish Date: Apr-14-14
- Price: $3.99
New arrival custom made to my specifications. Not only do these look like the original vintage grip screws and feel like the original vintage grip screws and fit like the original grip screws but they are ALSO HARDENED not like the original grip screws.…
New arrival custom made to my…
- Publish Date: Dec-07-13
- Price: $99.95
Here is a fine pair of pre hollow back grips, no cracks or unsightly chips or dents. UPDATE so I met this guy named David Bruhn doing business as DB Colts he sold me these grips and guaranteed me these were rare and very valuable.
I did a google…
Here is a fine pair of pre…
I am looking for a pair of original WWI Colt 1911 Double Diamond grips. My gun was manufactured in 1912.
I am looking for a pair of…
Want to Buy. Springfield 1911 "S" marked Thumb Safety like one in the photo. Down to my last few parts needed, also looking for "S" marked extractor, sear, and disconnector. Please advise Price and condition. Thanks.
Want to Buy. Springfield 1911…
I am looking for a Colt M1911A1 magazine appropriate for ser no 736,xxx. I have two fine mags that came with the weapon. One is a two toned, pinned base Colt mag with no markings. The other is a clean General Shaver "G". Both are in fine working order…
I am looking for a Colt…
Hi -- I'm looking for a Type 3 slide stop (5 groove) that was used on Ithaca and Remington Rand M1911A1 pistols. In order to match the gun the part must be the original dark parkerization that was used (looks blued). Parts that have been through a…
Hi -- I'm looking for a Type 3…
I have parts for your vintage 1911 frame, sears, disconnect, springs, MSH's, safeties, hammers etc. Let me know what you are looking for I might have it.
Price varies depending on component and plus shipping,
I have parts for your vintage…
Here are some of my magazines. You can post yours here to buy sell trade or swap.
Here are some of my magazines. …
